Infusion & Transfusion

Approx. Rs 7.25 / PieceGet Latest Price

Scalp Vein Set (GS-3004)

Short beveled siliconised needle facilitates atraumatic cannulation.

Thin wall needle provides better flow rate per gauge.

Butterfly shaped wings facilitates easy handling and attachment with the skin.

Butterflies are colour coded for instant identification of needle size.

The proximal end of the set is provided with flexible female luer fitting.

Butterfly connected to soft non-toxic, nonirritant tube which does not kink or coil.

Sterile, individually packed in Blister pack.

Additional Information:

Approx. Rs 96 / PIECEGet Latest Price

• DEHP Free needleless connectors offer a safe way to access I.V lines without the use of a needle.
• Prevents thrombotic occlusion and inhibits microbial colonization.
• Secure fitment to I.V cannula, I.V set, extension lines and CVC.
• Closed system controls infection.
• Swabbable port prevents infection and allows safe access.
• Clear PC body, Latex free.
• Low reverse pressure facilitates easy connection.
• Compatible with MRI.

• Needle free connector with tri extension line provided with rotating luer lock and three clamps.
• Luer fitments as per ISO standards.
• Sterile blister pack.
• Low prime volume: 0.90 ml.

Additional Information:

Approx. Rs 95.5 / PieceGet Latest Price

• Low pressure large bore extension line made up of PVC.
• Used primarily to connect the transducer system to the indwelling catheter.
• Male luer lock at one end and 3-way stop cock at other enabling the user to run two lines simultaneously.
• Three way stop cock may be used for blood sampling or extra medication.
• Can sustain a pressure upto 7 kg/ cm² or 100 psi.
• Sterile, individually packed in Blister pack.

Additional Information:

Approx. Rs 22 / PieceGet Latest Price

• Small bore high pressure extension line.
• Made of clear, non-toxic medical grade PVC material.
• Suitable for high pressure monitoring and for connection between syringe infusion pump and patient.
• Multi-purpose extension line provided with male luer lock at one end and female luer lock at other end and fits all standard equipment.
• Luer lock connectors provide secure fitting.
• Can sustain a pressure upto 10 kg/ cm² or 140 psi.
• Sterile, individually packed in Blister pack.

Additional Information:

Approx. Rs 12.98 / PieceGet Latest Price

• Sharp piercing spike for easy insertion in I.V container.
• Infusion set with built in air vent and bacteria barrier hydrophobic filter.
• Specially designed transparent cylindrical collapsible drip chamber to visualize the flow rate.
• Disc type 15μm fluid filter at the bottom of drip chamber filters any particulate matter in the I.V fluid.
• Provided with latex free “Y” type injection port made up of poly isoprene for additional medication.
• Efficient roller controller ensures better flow control.
• Provided with super smooth kink resistant tube for unobstructed flow.
• Fixed Luer lock for secure connection to all standard devices.
• Sterile, disposable, non-pyrogenic, individually packed.
• Polybag of 25/ Master Box of 500.

150 cm

20 drops/ml

Overview:

A vented infusion set is a crucial medical device designed for the safe and efficient administration of fluids, medications, blood products, or other therapeutic solutions directly into a patient's bloodstream. This device is widely used in healthcare settings, including hospitals, clinics, and home healthcare, to deliver precise and controlled dosages while preventing air from entering the patient's circulatory system.

Key Components:

A typical RMS Vented Infusion Set consists of the following key components:

Needle or Cannula: This is the sharp, pointed end of the infusion set that punctures the patient's skin and gains access to the bloodstream. It comes in various lengths and gauges, depending on the patient's needs and the type of therapy.

Tubing: The tubing is responsible for transporting the medication or fluids from the infusion container (e.g., IV bag) to the patient. It is typically made of medical-grade plastic and can vary in length.

Vented Spike: The vented spike is a part of the infusion set designed to puncture the rubber stopper of the IV bag or bottle. It allows for the venting of air and ensures a continuous flow of fluid.

Drip Chamber: This chamber helps control the flow of fluids by allowing healthcare providers to visualize the rate at which the solution is being infused. It also provides a location for air bubbles to collect before they reach the patient.

Clamp or Roller Clamp: The clamp allows healthcare professionals to regulate the flow rate of the infusion. By adjusting the clamp, they can control the rate at which the fluid or medication enters the patient's body.

Luer Lock or Luer Slip Connector: This is the interface that connects the infusion set to the IV catheter or other medical devices. It ensures a secure and leak-free connection.

Vented Cap: The vented cap is a critical feature of a vented infusion set. It allows air to escape from the system while preventing the entry of contaminants into the patient's bloodstream.

Benefits:

RMS Vented Infusion Sets offer several advantages in clinical practice:

Safety: Vented infusion sets are designed to minimize the risk of air embolisms, a potentially life-threatening condition caused by air entering the bloodstream. The vented cap prevents air from being infused into the patient.

Accurate Dosage: The infusion sets allow healthcare providers to precisely control the flow rate, ensuring that the patient receives the correct dosage of medication or fluids.

Ease of Use: Vented infusion sets are generally easy to set up and use, making them suitable for both professional healthcare providers and patients receiving home-based care.

Additional Information:

Approx. Rs 12 / PieceGet Latest Price

• Basic Infusion set with time-tested features.
• Manufactured from non-toxic and transparent P.V.C.
• Sharp piercing spike for easy insertion in I.V. container.
• Moulded drip chamber ensures fall of drops in the centre.
• Specially designed cylindrical collapsible drip chamber to visualize the flow rate.
• Disc type fluid filter at the bottom of chamber filters any particulate matter in the I.V. fluid.
• 150 cm long super smooth kink resistant tubing with efficient roller controller for accurate, unrestricted flow.
• Superior quality latex bulb for additional medication.
• Sterile, individually packed.

• Infusion set with built in air vent and microbial barrier hydrophobic filter.
• All other features are as above.

Additional Information:

Approx. Rs 6.5 / PieceGet Latest Price

• Specially designed lipid resistant 3-way stop cock with smooth tap rotation suitable during pressure infusion and invasive blood pressure monitoring.
• Made from clear, transparent polycarbonate which facilitates easy visualization of fluid flow.
• Rigid construction with circular flow channel prevents air entrapment.
• Smooth three arm handle is easy to operate and indicates fluid path.
• Minimum residual volume and uniform bore ensures maximum flow and minimum turbulence.
• Provided with two female luer lock ports and one male luer lock port.
• Male luer lock with rotating nut prevents accidental disconnection.
• Screw luer lock ensures safe and secure connection to other standard luers.
• Universal luer taper facilitates leak proof connection with corresponding standard devices.
• Sterile, individually packed in blister pack.
• Lipid compatible
• Minimum prime volume
• Arrows indicate flow direction
• Leakage free fitment

Additional Information:

Approx. Rs 45 / PieceGet Latest Price

• DEHP free Polyethylene high pressure monitoring extension line.
• Non-reactive and compatible to all commonly infused fluids.
• Small bore high pressure extension line suitable for high pressure applications, for example as connection between syringe, infusion pump and the patient.
• Provided with male and female luer lock at either ends, which facilitates secure fitment to all standard equipment.
• Sterile, individually packed in peel open soft blister pack.

Approx. Rs 3.79 / PieceGet Latest Price

The insulin syringes comes with 31G x 5/16″, 'Super-fine' siliconized insulin needles in order to reduce patient pain during injection. Low dead space ensures that the dosage is accurate and there is no wastage of medication.

A 1 mL disposable insulin syringe is a medical device commonly used by people with diabetes to administer insulin. It consists of several key components, including the barrel, plunger, needle, and protective cap. In this explanation, I'll describe the various parts and functions of a 1 mL insulin syringe in detail, covering its construction, usage, and importance in managing diabetes.

Barrel: The barrel of the insulin syringe is typically made of clear, medical-grade plastic. It is marked with clear, easy-to-read volume graduations in units of insulin (usually marked in units of 1 or 2). The barrel is where the insulin is drawn into and measured. The clear construction allows the user to see the volume of insulin being drawn and expelled.

Plunger: The plunger is a movable component inside the barrel. It has a rubber or silicone tip that creates a seal within the barrel to prevent any leakage of insulin during injection. The plunger is pushed to expel insulin from the syringe.

Needle: The needle is attached to the front end of the syringe. It is a fine, sharp, and sterile metal tube designed for easy penetration of the skin. The needle comes with a protective cap to keep it sterile before use. The length and gauge (thickness) of the needle may vary, and the choice depends on the individual's needs and preferences.

Protective Cap: The protective cap covers and protects the needle before use. It is essential to remove this cap just before injecting to maintain sterility and prevent accidental needle sticks.

Key Features and Functions:

Precision: The 1 mL insulin syringe is designed to provide precise measurement and delivery of insulin, which is crucial for accurate dosing. It allows for fine adjustments, which is especially important for those who require very small insulin doses.

Sterility: Insulin syringes are provided in sterile packaging to ensure that they are free from contaminants. The needle is also sterile and must remain protected until use to prevent infections.

Ease of Use: The syringe is designed to be user-friendly, with clear markings and easy-to-operate plunger for smooth insulin administration.

Disposable: These syringes are meant for single-use only. Once insulin is administered, the syringe should be disposed of in a proper sharps container to prevent accidents and ensure safety.

Customization: Patients can choose the needle gauge and length that suits their needs. Thinner needles are less painful, but they may take longer to inject insulin, while thicker needles are faster but can be more uncomfortable.

Safety: The protective cap and one-time use design help reduce the risk of needlestick injuries and infections.

Usage:

Prepare Insulin: Draw the required amount of insulin into the syringe by pulling back on the plunger, aligning the top of the plunger with the desired insulin dose on the barrel. Ensure there are no air bubbles in the syringe.

Prepare Injection Site: Clean the injection site with an alcohol swab and allow it to dry.

Administer Injection: Remove the protective cap from the needle and insert it into the injection site at the correct angle (usually 90 degrees for subcutaneous injections). Push the plunger down to inject the insulin.

Remove Needle and Dispose: After injecting, remove the needle from the skin and dispose of the entire syringe in a sharps container. Never reuse insulin syringes.

Additional Information:

Approx. Rs 60 / PieceGet Latest Price

• DEHP free Polyethylene high pressure monitoring extension line.
• Non-reactive and highly compatible to all the commonly infused fluids.
• Specially designed spiral type extension line for greater patient comfort and freedom of movement.
• It expands and contracts gently with patient movement and protects the patient, cannula, infusion equipment from accidental damage.
• All other features are as that of Hi line.
• Sterile, individually packed in peel open soft blister pack.
• Available size : 200 cm.
SPECIAL FEATURES
• High Pressure Line
• Polyethylene, DEHP free
• Non-reactive to all fluids
• Low prime volume

Additional Information:

Approx. Rs 48 / PieceGet Latest Price

• DEHP free Polyethylene high pressure monitoring extension line.
• Non-reactive and highly compatible to all the commonly infused fluids.
• Small bore high pressure extension line suitable for high pressure applications, for example as connection between syringe, infusion pump and the patient.
• Provided with male and female luer lock at either ends, which facilitates secure fitting to all standard equipment.
• Luer lock connectors provide secure fitting.
• Can sustain a pressure upto 40 kg/ cm² or 560 psi.
• Sterile, individually packed in Blister pack.
SPECIAL FEATURES
• High Pressure Line
• Polyethylene, DEHP free
• Non-reactive to all fluids
• Low prime volume

Additional Information:

Approx. Rs 28 / PieceGet Latest Price

• Needle free I.V Connector with split septum technology.
• Luer lock for secure fitment on one end & needle free port on the other.
• Sterile blister pack.
• Low prime volume: 0.08 ml.

Additional Information:

Approx. Rs 70.15 / BoxGet Latest Price

• MANZEN  DESIGN: Our lancets have an advanced glide control system for convenient use. They come with easy removable twist cap for safety. These lancets are small in size and can perfectly fit in your hand for easy grip and use.
• PREMIUM MATERIALS: Our safety lancet needle is made of top medical-grade materials. Made from natural and latex free plastic and superior metal, they are totally safe.
• MULTI-PURPOSE TOOL: The universal lancets are constructed to fit in all lancing devices except Softclix lancing device.
• LESS PAINFUL: The lancets are easy to use. Super-fine round points ensure less painful prick. With our lancets you don't have to penetrate deeply to draw the blood.

Additional Information:

Approx. Rs 95 / PieceGet Latest Price

Additional Information:

Approx. Rs 49 / PieceGet Latest Price

• Specialized measured volume set made up of DEHP free material.
• Equipped with a micro drip with reduced drop size of 60 drops per ml.
• Provided with a burette type chamber of 100 ml capacity with 10 ml overflow limit.
• Burette chamber is made of bio-compatible medical grade transparent styrene polymer, suitable for infusing all types of fluids.
• Patent design hanger facilitates hanging on the I.V. stand.
• Unique floating auto shut off valve acts as a floating indicator and automatically shuts off the drain path to prevent the passage of air in the line.
• No-kink device prevents kinking of tube during transportation and transfers.
• Separate plugs for extra medication and change over.
• Sterile, individually packed.

Additional Information:

Approx. Rs 87.98 / PieceGet Latest Price

• Specially designed DEHP free measured volume set with large calibrated burette chamber.
• Manufactured from PETG material.
• Easy to read scale with white contrast background.
• Floating auto shut off valve acts as floating indicator and automatically shuts off the drain path when the chamber gets empty toprevent any air trapping into the fluid line on entering patient's venous system.
• Micro dropper of 60 drops per ml.
• Sharp piercing spike provided with built in air inlet containing bacteria barrier filter.
• Separate plugs for extra medication and change over.
• Roller type flow controller provides accurate flow control.
• "Y" injection site for extra medication.
• No-kink device prevents kinking of tube during transport.

Additional Information:

Approx. Rs 80 / PieceGet Latest Price

• Needle free I.V connector with dual extension for running two lines simultaneously with rotating luer slip lock and two clamps.
• Sterile blister pack.
• Low prime volume: 0.60 ml.

Additional Information: